linux-fsl-imx51 (2.6.28-15.50fsl1araneo19) araneo; urgency=low

  * Bump SPIDER_KERNEL_VERSION to  "1.220"
  * drivers/usb/serial/option.c: Added C02LC 3G modem support.

 -- Michael Frey <michael.frey@canonical.com>  Mon, 25 Jan 2010 10:09:08 -0400

linux-fsl-imx51 (2.6.28-15.50fsl1araneo18) araneo; urgency=low

  * Bump SPIDER_KERNEL_VERSION to  "1.210"

 -- Michael Frey <michael.frey@canonical.com>  Thu, 3 Dec 2009 16:09:08 -0400

linux-fsl-imx51 (2.6.28-15.50fsl1araneo17) araneo; urgency=low

  * Patch cdc-acm.c.  Fix for LP# 490801

 -- Michael Frey <michael.frey@canonical.com>  Wed, 2 Dec 2009 14:00:08 -0400

linux-fsl-imx51 (2.6.28-15.50fsl1araneo16) araneo; urgency=low

  * Bump KERNEL_VERSION to 1.200

 -- Michael Frey <michael.frey@canonical.com>  Fri, 6 Nov 2009 11:59:08 -0400

linux-fsl-imx51 (2.6.28-15.50fsl1araneo15) araneo; urgency=low

  * Fix for WIFI freeze.  Increase buffer size

 -- Michael Frey <michael.frey@canonical.com>  Wed, 4 Nov 2009 09:34:08 -0400

linux-fsl-imx51 (2.6.28-15.50fsl1araneo14) araneo; urgency=low

  * Fix for ubifs pnode

 -- Michael Frey <michael.frey@canonical.com>  Fri, 23 Oct 2009 10:34:08 -0400

linux-fsl-imx51 (2.6.28-15.50fsl1araneo13) araneo; urgency=low

  * Bumped version -- no change

 -- Michael Frey <michael.frey@canonical.com>  Fri, 16 Oct 2009 11:50:08 -0400

linux-fsl-imx51 (2.6.28-15.50fsl1araneo12) araneo; urgency=low

  * A revision of the malfunction screen is not displayed after suspend/resume 
  * The change of the quantity of smallest movement of the touch panel.
  * A revision of the malfunction that jack-function with
	a volume option does not work.

 -- Michael Frey <michael.frey@canonical.com>  Fri, 16 Oct 2009 11:50:08 -0400

linux-fsl-imx51 (2.6.28-15.50fsl1araneo11) araneo; urgency=low

  * ssi suspend / resume fix

 -- Michael Frey <michael.frey@canonical.com>  Thu, 15 Oct 2009 10:03:38 -0400

linux-fsl-imx51 (2.6.28-15.50fsl1araneo10) araneo; urgency=low

  * ks7010 sdio detect fix

 -- Michael Frey <michael.frey@canonical.com>  Wed, 14 Oct 2009 10:57:38 -0400

linux-fsl-imx51 (2.6.28-15.50fsl1araneo9) araneo; urgency=low

  * change the SPIDER_KERNEL_VERSION to 1.100

 -- Michael Frey <michael.frey@canonical.com>  Fri, 2 Oct 2009 11:57:38 -0400

linux-fsl-imx51 (2.6.28-15.50fsl1araneo8) araneo; urgency=low

  * Latest ks7010 wifi patch
  * mx51_suspend_enter() failed recover fixed.
  * add error info message at nand_write_page().
  * corrected update at ECC-controler correct max.
  * don't read back on copy_leb().
  * don't set RO-mode, fixed write error.
  * check not yet power_supply_register
  * add calibration setting.
  * change save-reg info for resume.

 -- Michael Frey <michael.frey@canonical.com>  Tue, 29 Sep 2009 11:57:38 -0400

linux-fsl-imx51 (2.6.28-15.50fsl1araneo7) araneo; urgency=low

  * when resume audio, fix I2C interrupt process
  * internal version 1.000
  * fix color probrem of movie playing.
  * change .config
  * fix probrem when suspend during vide playing.
  * no sound after restart.
  * abnormal resume probrem

 -- Michael Frey <michael.frey@canonical.com>  Fri, 11 Sep 2009 09:57:38 -0400

linux-fsl-imx51 (2.6.28-15.50fsl1araneo6) araneo; urgency=low

  * when resume audio, fix I2C interrupt process
  * change pullup/keeper setting of IO port 
  * fix exclution probrem of WLAN iomux when Fn+1 On/Off
  * join last status WLAN LED and WLAN driver active.
  * probrem: in case of WLAN LED is on, WLAN driver is not active.
  * convert to value of speaker output(avarage of L and R output value)
  * adjust stregth of DDR clock at suspend
  * change threshold of battery off
  * fix USB keyboard suspend probrem
  * fix headphone noize probrem at plug-in/plun-out

 -- Michael Frey <michael.frey@canonical.com>  Mon, 7 Sep 2009 09:57:38 -0400

linux-fsl-imx51 (2.6.28-15.50fsl1araneo5) araneo; urgency=low

  * LCD back light force unblank at resume time
  * 0049 initialize watchdog timer before mount root file system

 -- Michael Frey <michael.frey@canonical.com>  Mon, 4 Sep 2009 09:27:38 -0400

linux-fsl-imx51 (2.6.28-15.50fsl1araneo4) araneo; urgency=low

  * Latest Patches from Sharp

 -- Michael Frey <michael.frey@canonical.com>  Mon, 3 Sep 2009 09:45:38 -0400

linux-fsl-imx51 (2.6.28-15.50fsl1araneo3) araneo; urgency=low

  * Latest Patches from Sharp

 -- Michael Frey <michael.frey@canonical.com>  Mon, 1 Sep 2009 09:45:38 -0400

linux-fsl-imx51 (2.6.28-15.50fsl1araneo2) araneo; urgency=low

  * Touch ignore / ignore.modules to skip abi check for new flavour

 -- Michael Frey <michael.frey@canonical.com>  Mon, 31 Aug 2009 19:45:38 -0400

linux-fsl-imx51 (2.6.28-15.50fsl1araneo1) araneo; urgency=low

  * debian.fsl-imx51/rules.d/2-binary-arch.mk
    Install zImage as well as zImage-abi-flavour

 -- Michael Frey <michael.frey@canonical.com>  Mon, 31 Aug 2009 14:35:57 -0400

linux-fsl-imx51 (2.6.28-15.50fsl1~araneo1) araneo; urgency=low

  * Initial Sharp kernel

 -- Michael Frey <michael.frey@canonical.com>  Fri, 28 Aug 2009 14:35:57 -0400

linux-fsl-imx51 (2.6.28-15.50fsl1) jaunty-proposed; urgency=low

  [ Brad Figg ]

  * Revert "Support the eMMC4.3 card"
  * Revert "MMC: Add support for 8-bit cards"
  * Revert "SAUCE: mx51: fix to1.1 in mxc_iomux_set_input"
  * Revert "SAUCE: imx51: fec cache flush functions are incorrect"
  * Revert "SAUCE: Revert ENGR00103870 FEC reopening causes network wdog
    timeout"
  * Revert "SAUCE: imx51: fec: fix cache operations for receive"
  * Revert "ARM: Make ARM arch aware of ubuntu/ drivers"
  * Revert "ARM:mx51 Add CONFIG_ARCH_MXC_CANONICAL to disable parts of
    Freescale's code"
  * Revert "ARM:mx51 Add SoC and board support for mx51 platforms"
  * Revert "ARM: Add more cache memory types macros"
  * Revert "Do not use OOB with MLC NAND"
  * (fsl-imx51) [Config] Update configurations

  [ Stefan Bader ]

  * (fsl-imx51) Move all headers into the arch dependent package

  [ Upstream Kernel Changes ]

  * ARM.imx51 Freescale:ENGR00068619 JFFS2 community fix with not use OOB
  * ARM.imx51 Freescale:ENGR00069937 Community patch for Fix mount error in
    case of MLC flash
  * ARM.imx51 Freescale:Enable partial low interrupt latency mode for
    ARM1136
  * ARM.imx51 Freescale:Workaround for the global I cache invalidation
    ARM1136 Errata
  * ARM.imx51 Freescale:ENGR00107731-1 arm: Add more cache memory types
    macros
  * ARM.imx51 Freescale:ENGR00107731-2: Port imx 3.3.0 release to 2.6.28
  * ARM.imx51 Freescale:ENGR00107731-3: Add MX25 support
  * ARM.imx51 Freescale:ENGR00107392 Move asm/arch headers to linux inc dir
  * ARM.imx51 Freescale:ENGR00107844-1: regulator: allow search by
    regulator name
  * ARM.imx51 Freescale:ENGR00107844-2: regulator: update drivers to
    mainline regulator api
  * ARM.imx51 Freescale:ENGR00107844-3: mx25: mainline regulator updates
  * ARM.imx51 Freescale:ENGR00107844-4 mc13892: add regulator driver
  * ARM.imx51 Freescale:ENGR00107844-5 MX51: changes for new regulator API.
  * ARM.imx51 Freescale:ENGR00105179 USBPHY_VBUS source enable and PWR/OC
    pins config for MX51.
  * ARM.imx51 Freescale:ENGR00103831 Add ON_OFF key as wakeup source in
    MX51 3DS
  * ARM.imx51 Freescale:ENGR00107413 imx51: add UniFi support
  * ARM.imx51 Freescale:ENGR00107439 IPUv3: Fix V4L2 capture rotation issue
  * ARM.imx51 Freescale:ENGR00107453 MC13892 backlight can not work after
    resume
  * ARM.imx51 Freescale:ENGR00106749 MX51: Add USB Host2 support for MX51
  * ARM.imx51 Freescale:ENGR00107511 Reset NFC_CONFIG3 register during
    watchdog warm reset
  * ARM.imx51 Freescale:ENGR00106653 MC13892: Add MC13892 spi support
  * ARM.imx51 Freescale:ENGR00107614 MX35: Select CONFIG_MXC_PMIC_I2C
    option
  * ARM.imx51 Freescale:ENGR00107637 SMSC911x: add support for 922x chips
  * ARM.imx51 Freescale:ENGR00107484 MX37: Fix DVFS core not stable issue
  * ARM.imx51 Freescale:ENGR00107789 V4L2: Fix display issue for RGB input
    pixel format
  * ARM.imx51 Freescale:ENGR00107759 MX37 : Can not enter STOP mode
  * ARM.imx51 Freescale:ENGR00107806-1 sgtl5000: use func to control spk
    amp shutdown
  * ARM.imx51 Freescale:ENGR00107806-2 imx37: sgtl5000: use func to control
    spk amp shutdown
  * ARM.imx51 Freescale:ENGR00107806-3 imx35: sgtl5000: use func to control
    spk amp shutdown
  * ARM.imx51 Freescale:ENGR00107806-4 imx51: sgtl5000: use func to control
    spk amp shutdown
  * ARM.imx51 Freescale:ENGR00107568 MX51: Add support to CLAA WVGA LCD
    panel
  * ARM.imx51 Freescale:ENGR00107856 IPUv3: Add RGB565 and LVDS666 pixel
    formats support for DC mapping
  * ARM.imx51 Freescale:ENGR00107762 IPUv3: Modify the condition to enable
    IPU clock
  * ARM.imx51 Freescale:ENGR00107853 ipuv3 : Enhance the DP CSC implement
  * ARM.imx51 Freescale:ENGR00107857 i.MX31 build error when usb Host2 is
    not selected.
  * ARM.imx51 Freescale:ENGR00107980 IPUv3: Remove unnecessary DP sync flow
    SRM mode updates
  * ARM.imx51 Freescale:ENGR00107942 Fix the issue caused by the unsafe
    card removal
  * ARM.imx51 Freescale:ENGR00098764 Support the eMMC4.3 card
  * ARM.imx51 Freescale:ENGR00107027 SD: System in the dead-loop after
    unsafe sd card removal
  * ARM.imx51 Freescale:ENGR00107883 IPUv3: Modify DI disp clk divider and
    clock waveform for DI0
  * ARM.imx51 Freescale:ENGR00108121 MX35: Fix wrong IOMUX base address
  * ARM.imx51 Freescale:ENGR00107755 USB OTG: System hang when copying file
    to USB HOST
  * ARM.imx51 Freescale:ENGR00107644 SMSC911x: Add suspend and resume
    support
  * ARM.imx51 Freescale:ENGR00108365 Incorrect copyright update in
    mx35_3stack_gpio.c
  * ARM.imx51 Freescale:ENGR00107850 The system can not reboot using the
    "reboot" command
  * ARM.imx51 Freescale:ENGR00105246 SPI: loopback support and add SCLK ctl
    inactive state configure
  * ARM.imx51 Freescale:ENGR00105124 Enable NFC symmetry mode
  * ARM.imx51 Freescale:ENGR00107871 Keep SRTC alive when main battery is
    removed
  * ARM.imx51 Freescale:ENGR00107483: [MX37] failed to test our MSC driver
    with USBCV 1.3.
  * ARM.imx51 Freescale:ENGR00107987 restructure FM driver
  * ARM.imx51 Freescale:ENGR00107992 mx51 FM support
  * ARM.imx51 Freescale:ENGR00108558 adjust mx35 FM platform data
  * ARM.imx51 Freescale:ENGR00107359: MX51: SCC2 unit test failed
    allocating a partition.
  * ARM.imx51 Freescale:ENGR00108529 mxcfb: rework lcd interface
    definitions
  * ARM.imx51 Freescale:ENGR00108588 MX51: Restructure IOMUX code
  * ARM.imx51 Freescale:ENGR00108843 ipu3: support bigger hsync widths
  * ARM.imx51 Freescale:ENGR00108315 mxcfb: Add Chontel CH7026 VGA driver
  * ARM.imx51 Freescale:ENGR00108672 MX51: Add support for Babbage
  * ARM.imx51 Freescale:ENGR00108162-1 sgtl5000: add audio for imx 3stack
  * ARM.imx51 Freescale:ENGR00108162-2 sgtl5000: add audio for imx 3stack
  * ARM.imx51 Freescale:ENGR00108948 mx51: fix to1.1 in mxc_iomux_set_input
  * ARM.imx51 Freescale:ENGR00108905 sgtl5000: remove unneeded check of
    spk_amp_event
  * ARM.imx51 Freescale:ENGR00109149 mx51 sgtl5000: correct platform data
    to vddd 1.2v
  * ARM.imx51 Freescale:ENGR00109027-1 MX51 3-stack Fix suspend mode for
    regulator.
  * ARM.imx51 Freescale:ENGR00109027-2 API changes for new regulator
    interface.
  * ARM.imx51 Freescale:ENGR00109244-1 MX51 Add GPO* regulators.
  * ARM.imx51 Freescale:ENGR00109244-2 Add GPO* regulators.
  * ARM.imx51 Freescale:ENGR00109268 unifi_fs: don't reset chip if power is
    on by default
  * ARM.imx51 Freescale:ENGR00109161 fec: fix cache operations for receive
  * ARM.imx51 Freescale:ENGR00109689 Revert ENGR00103870 FEC reopening
    causes network wdog timeout
  * ARM.imx51 Freescale:ENGR00109683 fec cache flush functions are
    incorrect
  * ARM.imx51 Freescale:ENGR00107699 ipu: support new ipu device lib
  * ARM.imx51 Freescale:ENGR00110139 MX51:Add support for MOUSE support for
    mx51 boards
  * ARM.imx51 Freescale:ENGR00108533 Fix isl29003 may not be recognized
    after system reboot
  * ARM.imx51 Freescale:ENGR00108706 Fix _ipu_dp_set_csc_coefficients can
    not set the right csc value
  * ARM.imx51 Freescale:ENGR00108699 [MX51] eMMC4.3 card support
  * ARM.imx51 Freescale:ENGR00107970 add mc13892 init for mx35 3ds 2.0
  * ARM.imx51 Freescale:ENGR00107666 i.MX31 usb gadget remote wakeup
    support.
  * ARM.imx51 Freescale:ENGR00108463 Support i.MX31 USB host remote wakeup
    by USB device.
  * ARM.imx51 Freescale:ENGR00108339 Add TV Encoder V2 support for MX51 TO2
  * ARM.imx51 Freescale:ENGR00108796 fix i.MX35 nobady cared irq of usbotg
    hcd when system resume.
  * ARM.imx51 Freescale:ENGR00107483 Revert [MX37] failed to test our MSC
    driver with USBCV 1.3."
  * ARM.imx51 Freescale:ENGR00108856 Fix DVFS core can not be resumed from
    low power mode
  * ARM.imx51 Freescale:ENGR00108904 MX35: Fix gps failure caused by one
    missed input iomux
  * ARM.imx51 Freescale:ENGR00108055 Add hw-random for RNGA and RNGC
  * ARM.imx51 Freescale:ENGR00108939 fix usb gadget driver unregister hang
    up after usb gadget suspend.
  * ARM.imx51 Freescale:ENGR00104641: scc2_internals.h license info
    incorrect
  * ARM.imx51 Freescale:ENGR00109084 IPUv3: Add DP SRM updates when
    enabling/disabling DP_FG
  * ARM.imx51 Freescale:ENGR00108994 MX35: I2C bus can't work when rmmod
    and re-insmod camera module
  * ARM.imx51 Freescale:ENGR00109264 ipuv3 : CSC not correct for PP task
  * ARM.imx51 Freescale:ENGR00108890 [MX37] Some micro sd cards can't be
    recognized.
  * ARM.imx51 Freescale:ENGR00106026-1 MX31: Add IIM platform device
  * ARM.imx51 Freescale:ENGR00106026-2 MX35: Add IIM platform device
  * ARM.imx51 Freescale:ENGR00106026-3 MX37: Add IIM platform device
  * ARM.imx51 Freescale:ENGR00106026-4 MX51: Add IIM platform device
  * ARM.imx51 Freescale:ENGR00106026-5 Add mxc IIM driver support
  * ARM.imx51 Freescale:ENGR00109285 SD/MMC: The SD card interrupt can't be
    detected after system resume
  * ARM.imx51 Freescale:ENGR00109301 [MX35]ATA:Need more time to resume
    back
  * ARM.imx51 Freescale:ENGR00109685 sgtl5000: fix headphone detect
  * ARM.imx51 Freescale:ENGR00109633 V4L2 capture: Fix enable/disable
    ov3640 camera's mclk issue
  * ARM.imx51 Freescale:ENGR00109658 V4l2 capture:Add seperate VF and ENC
    rotation ioctls
  * ARM.imx51 Freescale:ENGR00109725 disable mc13892 auto charge for mx35
  * ARM.imx51 Freescale:ENGR00109721 IPUv3:Fix the issue of resizing from
    1280*720 to 800*480
  * ARM.imx51 Freescale:ENGR00109106 imx37: kernel panic after enable GCOV
  * ARM.imx51 Freescale:ENGR00109915 GPS gpio control driver update.
  * ARM.imx51 Freescale:ENGR00110144 [MX51]Two esdhc port can't work
    simultaneously.
  * ARM.imx51 Freescale:ENGR00107688 ASOC: Resolve 24/32-bit mono wav
    playing problem on sgtl5000
  * ARM.imx51 Freescale:ENGR00110150 FEC new fix of reopening causes
    network wdog timeout
  * ARM.imx51 Freescale:ENGR00109155 sgtl5000: add reg_cache
  * ARM.imx51 Freescale:ENGR00110076 sgtl5000: fix audio pops
  * ARM.imx51 Freescale:ENGR00110536-1 Made files less regulator specific.
    Added some error checking.
  * ARM.imx51 Freescale:ENGR00110536-2 Port mc13783 to 2.6.28
  * ARM.imx51 Freescale:ENGR00110536-3 MX3x specific changes for mc13783
    regulator to work.
  * ARM.imx51 Freescale:ENGR00110536-4 mc13892: Added pmic_alloc_data
    function
  * ARM.imx51 Freescale:ENGR00110536-5 MX51: Got rid of compiler warning.
  * ARM.imx51 Freescale:ENGR00111305 Enable CONFIG_INPUT_EVDEV in MX51
    defconfig
  * ARM.imx51 Freescale:ENGR00111294 Not enter suspend state when the
    keypad is pressed
  * ARM.imx51 Freescale:ENGR00111028 Fix boot failure on MX51 MC13892 1.1
    board with VBAT 4.2v
  * ARM.imx51 Freescale:ENGR00111379-1 backlight: update wm8350 for 2.6.28
  * ARM.imx51 Freescale:ENGR00111379-2 wm8350: port wm8350 to 2.6.28 for
    i.mx37
  * ARM.imx51 Freescale:mfd: Add WM8350 revision H support
  * ARM.imx51 Freescale:ENGR00111296: sgtl5000: fix Playback Volume min not
    0
  * ARM.imx51 Freescale:ENGR00111242-1-MX25 Enable the
    CONFIG_MMC_UNSAFE_RESUME option
  * ARM.imx51 Freescale:ENGR00111242-2-MX51-3DS Enable the
    CONFIG_MMC_UNSAFE_RESUME
  * ARM.imx51 Freescale:ENGR00111242-3-MX51-DEF Enable the
    CONFIG_MMC_UNSAFE_RESUME option
  * ARM.imx51 Freescale:ENGR00111242-4-MX3X/27 Enable the
    CONFIG_MMC_UNSAFE_RESUME option
  * ARM.imx51 Freescale:ENGR00110256 - RNG: Fail to get random numbers.
    Possibility:100%
  * ARM.imx51 Freescale:ENGR00110363 MX35: MCU-PMIC driver porting to
    2.6.28
  * ARM.imx51 Freescale:ENGR00109146 DVFS: System can not go to APM if DVFS
    core is enabled
  * ARM.imx51 Freescale:ENGR00110461 Fix changing CPU rate impacts per_clk
    in MX35
  * ARM.imx51 Freescale:ENGR00110740-1 MX31:Build-in IIM driver
  * ARM.imx51 Freescale:ENGR00110740-2 MX35:Build-in IIM driver
  * ARM.imx51 Freescale:ENGR00110740-3 MX37:Build-in IIM driver
  * ARM.imx51 Freescale:ENGR00110740-4 MX51:Build-in IIM driver
  * ARM.imx51 Freescale:ENGR00111086 Add SYS SW Reset control for VPU
  * ARM.imx51 Freescale:ENGR00108639 ipuv3: add IC overlay support
  * ARM.imx51 Freescale:ENGR00111297 Fix vpu compiling error on mx31
  * ARM.imx51 Freescale:ENGR00111499 mx51:GPU 2D Clock Support
  * ARM.imx51 Freescale:ENGR00110257 unifi_fs: re-initialize chip every
    time insert module
  * ARM.imx51 Freescale:ENGR00111696 mx35: GPU 2D clock support
  * ARM.imx51 Freescale:ENGR00111697 fix mx27 building failure on .28
    kernel
  * ARM.imx51 Freescale:ENGR00110748 SGTL5000: Shut down i2s sclk/lrclk
    after audio playback stops
  * ARM.imx51 Freescale:ENGR00111746 Sgtl5000: Bug fix
  * ARM.imx51 Freescale:ENGR00111524 AK4647 driver porting to 2.6.28
  * ARM.imx51 Freescale:ENGR00111526 MX35: WM8580 driver porting to 2.6.28
  * ARM.imx51 Freescale:ENGR00111751 Fix bug in the I2S Master mode
  * ARM.imx51 Freescale:ENGR00111755 MX35: Build in SGTL5000, AK4647 and
    WM8580
  * ARM.imx51 Freescale:ENGR00109543 Sets mc13892 CHRGRAW scaling to divide
    by 5
  * ARM.imx51 Freescale:ENGR00111681 MX51 Enable oprofile for L1
  * ARM.imx51 Freescale:ENGR00111670-1 ch7026: Return error when not
    present
  * ARM.imx51 Freescale:ENGR00111670-2 mxcfb: support mode string on
    command line
  * ARM.imx51 Freescale:ENGR00111670-3 sgtl5000: Use internal vddd reg for
    sgtl5000 rev 0x11
  * ARM.imx51 Freescale:ENGR00111670-4 ehci: move machine specific host2
    init
  * ARM.imx51 Freescale:ENGR00111670-5 MX51: Add Babbage2 platform support
  * ARM.imx51 Freescale:ENGR00106025-1 RTC: Add IMX DryIce RTC driver
  * ARM.imx51 Freescale:ASoC: Add WM8350 AudioPlus codec driver
  * ARM.imx51 Freescale:ALSA: ASoC - Add missing __devexit annotation to
    wm8350.c
  * ARM.imx51 Freescale:mfd: Keep a cache of WM8350 volatile values
  * ARM.imx51 Freescale:ENGR00108541 fix system crash issue due to trying
    to display 1 frame on the LCD
  * ARM.imx51 Freescale:ENGR00111971 mx37: allocate wm8350 irq
  * ARM.imx51 Freescale:ENGR00111946 Watchdog: oops when watchdog resume
  * ARM.imx51 Freescale:ENGR00109080 MX35: Add TVIN power-saving mode
  * ARM.imx51 Freescale:ENGR00112010 mx51:set gpu3d clock parent to ahb
    clock
  * ARM.imx51 Freescale:ENGR00111686 FM: second time modprobe mxc_si4702
    failed after rmprobe
  * ARM.imx51 Freescale:ENGR00111976 Fix IPUv3 U/V offset setting issue
  * ARM.imx51 Freescale:ENGR00111918 SGTL5000: Enable amixer controls Jack
    Function/Speaker Function
  * ARM.imx51 Freescale:ENGR00112020 sgtl5000: resume fixes
  * ARM.imx51 Freescale:ENGR00111898-1 mx37: wm8350 soc audio support
  * ARM.imx51 Freescale:ENGR00111898-2 wm8350: soc audio support
  * ARM.imx51 Freescale:ENGR00112123: MX51:Core at incorrect frequency at
    the lower GP voltage.
  * ARM.imx51 Freescale:ENGR00111996 Fix camera suspend issue in MX51
  * ARM.imx51 Freescale:ENGR00112014 Add ATA support for MX51 3DS in 28
    kernel
  * ARM.imx51 Freescale:ENGR00101496 MC13892 battery driver
  * ARM.imx51 Freescale:ENGR00111733 Onewire: Kernel dump when inserted
    mxc_w1 module
  * ARM.imx51 Freescale:ENGR00112155 Error bool definition in ipu.h for
    user space c++ compiler
  * ARM.imx51 Freescale:ENGR00112201 mtd: export nand_do_read/write_ops
    functions
  * ARM.imx51 Freescale:ENGR00112200 Add cryptodev device
  * ARM.imx51 Freescale:ENGR00112199 Import EA 3780 release 4
  * ARM.imx51 Freescale:ENGR00112203-1 mx35:CONFIG_FORCE_MAX_ZONEORDER
    Support
  * ARM.imx51 Freescale:ENGR00112203-2 mx51:CONFIG_FORCE_MAX_ZONEORDER
    Support
  * ARM.imx51 Freescale:ENGR00107628 Android Accelerometer support in imx31
    3stack
  * ARM.imx51 Freescale:ENGR00112238-1 mx35: Change
    CONFIG_FORCE_MAX_ZONEORDER
  * ARM.imx51 Freescale:ENGR00112238-2 mx51: change
    CONFIG_FORCE_MAX_ZONEORDER
  * ARM.imx51 Freescale:ENGR00112237 Add FM support in MX51 28 kernel
  * ARM.imx51 Freescale:ENGR00070770 MX51 SIM driver
  * ARM.imx51 Freescale:ENGR00111644 i.MX51 usb gadget mass storage data in
    failure
  * ARM.imx51 Freescale:ENGR00112265 MX51:GPIO change to enable CLAA WVGA
    panel
  * ARM.imx51 Freescale:ENGR00111928 Fix a bug when poweroff CLAA WVGA
    panel
  * ARM.imx51 Freescale:ENGR00112184 IPUv3:Correct resersed input/output
    IRT EOF bits
  * ARM.imx51 Freescale:ENGR00112275 fix break in imx51_defconfig
  * ARM.imx51 Freescale:ENGR00111738 Add regulator PWGT1,2
  * ARM.imx51 Freescale:ENGR00112269 MX51: Warning is reported when rmmod
    g_ether
  * ARM.imx51 Freescale:ENGR00112449 BUGFIX[STMP378x] Ethernet driver can
    not read the chip ID
  * ARM.imx51 Freescale:ENGR00112588 stmp3780 usb gadget support.
  * ARM.imx51 Freescale:ENGR00112563 add STMP3780 regulator driver
  * ARM.imx51 Freescale:ENGR00112613 stmp3780:build usb gadget driver as
    modules in imx233_defconfig.
  * ARM.imx51 Freescale:ENGR00112611 use resource_size instead of 'r->end -
    r->start + 1' in usb dirver.
  * ARM.imx51 Freescale:ENGR00112374 Make unifi v6 work
  * ARM.imx51 Freescale:ENGR00112566 IPUv3: Reduce waiting time of ipu
    interrupt.
  * ARM.imx51 Freescale:ENGR00112279 DVFS CORE: Frequency and voltage keep
    changing up and down
  * ARM.imx51 Freescale:ENGR00112716 MX51:Change CSI1 HSYNC and CSI1 VSYNC
    pads to be GPIO pins
  * ARM.imx51 Freescale:ENGR00111687 IPUv3:Support IC local alpha blending
  * ARM.imx51 Freescale:ENGR00109485 Wifi failure on MX31
  * ARM.imx51 Freescale:ENGR00112539 MX25: Migrate mx25 specific code from
    2.6.26 to 2.6.28
  * ARM.imx51 Freescale:ENGR00112706 Add MX25 support for FlexCAN and RTC
    to 2.6.28
  * ARM.imx51 Freescale:ENGR00112025 ASRC driver enhancement
  * ARM.imx51 Freescale:ENGR00112804 Litmit nand size to 2G for stmp3780
  * ARM.imx51 Freescale:ENGR00112654 MX35: Port bluetooth pcm driver to
    2.6.28 kernel
  * ARM.imx51 Freescale:ENGR00112856 MX37: System crashes if waking up LCD
    from LP-APM mode
  * ARM.imx51 Freescale:ENGR00112865 Fix kernel crash when
    imx_3stack_wm8350 probe
  * ARM.imx51 Freescale:ENGR00112888 Update imx31 3stack defconfig
    generated after menuconfig
  * ARM.imx51 Freescale:ENGR00112840 make imx 31/35/37 3stack board unifi
    V6 work
  * ARM.imx51 Freescale:ENGR00112917 imx37: Overflow in
    wm8350_regulator_init
  * ARM.imx51 Freescale:ENGR00112635-1 Port MC34704 regulator driver to
    kernel-2.6.28
  * ARM.imx51 Freescale:ENGR00112635-2 MX25: Add MC34704 support for
    kernel-2.6.28
  * ARM.imx51 Freescale:ENGR00112081 Host mode not detecting device when
    OTG port is in OTG mode
  * ARM.imx51 Freescale:ENGR00108078 SPI: fail when spi IRQ number is zero
  * ARM.imx51 Freescale:ENGR00112870 SPI: workaround for chipselect pin may
    not keep correct level
  * ARM.imx51 Freescale:ENGR00112717 fix imx233 can not wake up
  * ARM.imx51 Freescale:ENGR00112509 : [MX37] failed to test our MSC driver
    with USBCV 1.3.
  * ARM.imx51 Freescale:ENGR00112841 MX51 BBG2: Add Power Key support
  * ARM.imx51 Freescale:ENGR00108842-1 : Enable booting with CPU frequency
    set in redboot.
  * ARM.imx51 Freescale:ENGR00108842-2 : MX51: Add support for CPU freq at
    1GHz.
  * ARM.imx51 Freescale:ENGR00113058: MX51: BBG2 does not boot if freq in
    redboot is not set to 1GHz.
  * ARM.imx51 Freescale:ENGR00112462 sgtl5000: don't mute adc in digital
    mute
  * ARM.imx51 Freescale:ENGR00112920 MX51: Add GPS to support 2.6.28 kernel
  * ARM.imx51 Freescale:ENGR00111960 MX25: Add functionality for LCDC clock
  * ARM.imx51 Freescale:ENGR00112121 eSDHC driver enhancementes
  * ARM.imx51 Freescale:[Bug 77] ALSA sample rate is off for 22050Hz and
    32KHz
  * ARM.imx51 Freescale:ENGR00112477 SDHC: Remove GPIO pin inactive/active
    on suspend/resume
  * ARM.imx51 Freescale:ENGR00112977 Support the removal of debug board in
    MX51 3Stack
  * ARM.imx51 Freescale:ENGR00112641 MX25: Change MTD partitions on NAND
  * ARM.imx51 Freescale:ENGR00113183 : rebase i2c slave to 2.6.28
  * ARM.imx51 Freescale:ENGR00112272 MX31/35 RTC: To make mxc_rtc
    independent of pmic_rtc
  * ARM.imx51 Freescale:ENGR00113088 MX51:Fix artifacts display issue on
    CLAA WVGA panel
  * ARM.imx51 Freescale:ENGR00112042 Camera viewfinder cannot display
    correctly on MX25
  * ARM.imx51 Freescale:ENGR00111992 Support multiple ADC channel co-work
  * ARM.imx51 Freescale:ENGR00113158 MX25: Port camera feature to 2.6.28
  * ARM.imx51 Freescale:ENGR00110765 Support of 720p in IPU/TVE
  * ARM.imx51 Freescale:ENGR00113061 [MX51] Enable the eSDHC slot2 on
    2.6.28
  * ARM.imx51 Freescale:ENGR00113154 TZIC: Correct Wakeup registers
  * ARM.imx51 Freescale:ENGR00111702 re-work mc13783 regulator to make
    camera work
  * ARM.imx51 Freescale:ENGR00113105 MX25: Fix kernel dump issue when
    inactivate ESAI ports
  * ARM.imx51 Freescale:ENGR00113242 IPUv3: Add new ioctl to get ipu
    channel type of fb.
  * ARM.imx51 Freescale:ENGR00112889 ASRC driver multi-instance support
  * ARM.imx51 Freescale:ENGR00113294 GPS:Make gps driver default menuconfig
    to be module config
  * ARM.imx51 Freescale:ENGR00113254 build in usb drivers in default for
    i.MX51
  * ARM.imx51 Freescale:ENGR00113284 use late_initcall to fix usb gadget
    drvers init issue.
  * ARM.imx51 Freescale:ENGR00113302 MX51 Babbage:Support CLAA WVGA lcd
    panel
  * ARM.imx51 Freescale:ENGR00113314 STMP3780: poweroff command does not
    actually shut the device off
  * ARM.imx51 Freescale:ENGR00113315 STMP3780: Incorrectly set VDDIO
    voltage
  * ARM.imx51 Freescale:ENGR00112918-1: Add support for SW controlled
    frequency scaling.
  * ARM.imx51 Freescale:ENGR00112918-2: MX51: Add support for SW controlled
    frequency scaling.
  * ARM.imx51 Freescale:ENGR00093265 Add ASRC script and ASRC p2p script
    support in SDMA driver
  * ARM.imx51 Freescale:ENGR00096014-1 ASRC-ESAI per_2_per transfer
  * ARM.imx51 Freescale:ENGR00096014-2 ASRC-SSI per_2_per transfer
  * ARM.imx51 Freescale:ENGR00113339 Remove regulator warning when modprobe
    ov2640_camera
  * ARM.imx51 Freescale:ENGR00112775 ipu: fix active line display timings
  * ARM.imx51 Freescale:ENGR00113366 MX27ads: Fix compiling error
  * ARM.imx51 Freescale:ENGR00113403: Fixed MX37 build break caused by SW
    Frequency scaling.
  * ARM.imx51 Freescale:ENGR00113331 set host mode after usbcmd reset for
    ehci_run.
  * ARM.imx51 Freescale:ENGR00112832 fix copyright problem with Huashan USB
    gadget patch
  * ARM.imx51 Freescale:ENGR00113307 stmp3780 usb host support.
  * ARM.imx51 Freescale:ENGR00113176: MX51:Add IPU vdi support
  * ARM.imx51 Freescale:ENGR00113464 Fix compiling error for MX31-ads,
    MX31-3stack and MX35-3stack
  * ARM.imx51 Freescale:ENGR00113467 MX25: Fix kernel dump issue when CAN
    up again
  * ARM.imx51 Freescale:ENGR00113478 IPUv1:Fix video play break without
    resizing and rotation
  * ARM.imx51 Freescale:ENGR00113505 Disable NAND driver interleave mode
    support
  * ARM.imx51 Freescale:ENGR00113473 MX51: Bluetooth not work when lp_apm
    be the parent clk of uart
  * ARM.imx51 Ubuntu:Updated imx51 configuration
  * ARM.imx51 Freescale:ENGR00111065 MX31 Compiler warning on initializing
    dpt_resources in devices.c
  * ARM.imx51 Freescale:ENGR00107200 MX25: The SW workaround for left/right
    channel random swap issue
  * ARM.imx51 Freescale:ENGR00113541 IPUv3:Support IC combing with local
    alpha contained in pixel
  * ARM.imx51 Freescale:ENGR00113376 [MX37] SD can't detected after fast
    removal/insertion
  * ARM.imx51 Freescale:ENGR00113197-1 Fix Write pending issue with hwclock
    function
  * ARM.imx51 Freescale:ENGR00113197-2 disable RTC clock when it's not
    active
  * ARM.imx51 Freescale:ENGR00113632 Optimize mx31 3ds board standby power
  * ARM.imx51 Freescale:ENGR00113656 MX31 dptc resource defination error
  * ARM.imx51 Freescale:ENGR00113106 MX25 Camera: Some kernel message
    dumped when remove ov2640_camera
  * ARM.imx51 Freescale:ENGR00113607 Refine and unify the definitions of
    the two mmc host
  * ARM.imx51 Freescale:ENGR00113673 IPUv3:Fix RGB to RGB pixel format
    changing with IC PRP_VF
  * ARM.imx51 Freescale:ENGR00113743 MX25:Support IIM driver
  * ARM.imx51 Freescale:ENGR00113773 Add apm support for mc13892 battery
  * ARM.imx51 Freescale:ENGR00113666 CAN: Triggers the WARN_ON_ONCE when
    receiving data
  * ARM.imx51 Freescale:ENGR00113055-1 Add ability to read and user EDID
    info
  * ARM.imx51 Freescale:ENGR00113055-2 Added ability to read EDID data and
    use it to set monitor.
  * ARM.imx51 Freescale:ENGR00113827 [stm378x] avoid power dip when
    initializing SD card
  * ARM.imx51 Freescale:ENGR00113828 mc9s08dz60 keypad driver
  * ARM.imx51 Freescale:ENGR00113676 ESAI: Cann't support playing Mono file
  * ARM.imx51 Freescale:ENGR00113364-1 ASOC:Add AK5702 support for ESAI
    record
  * ARM.imx51 Freescale:ENGR00113364-2 mx25:AK5702 asoc support
  * ARM.imx51 Freescale:ENGR00114026 MX51 Prevent 2nd initialization of
    framebuffer.
  * ARM.imx51 Freescale:ENGR00114023-1 Support for dual monitors.
  * ARM.imx51 Freescale:ENGR00114023-2 MX51: Add support for dual monitors.
  * ARM.imx51 Freescale:ENGR00114005 MX35: Disable 24M and audio OSC in
    stop mode
  * ARM.imx51 Freescale:ENGR00114097 MX51 Babbage: Register backlight
    device only display card attached
  * ARM.imx51 Freescale:ENGR00114092 MX35: Enable CONFIG_SDMA_IRAM option
  * ARM.imx51 Freescale:ENGR00113546 MX51: set PLL2 as UART parent clk
  * ARM.imx51 Freescale:ENGR00114113 MX25: Enable CONFIG_SND_MXC_SOC_IRAM
    and CONFIG_SDMA_IRAM option
  * ARM.imx51 Freescale:ENGR00114139 MX51 Babbage: remove MC13892 backlight
    device
  * ARM.imx51 Freescale:ENGR00114157-1 Add SPI data flash driver support
  * ARM.imx51 Freescale:ENGR00114157-2 Add SPI data flash support for MX51
    babbage2.5
  * ARM.imx51 Freescale:ENGR00114145 disable pmic charger on Babbage
  * ARM.imx51 Freescale:ENGR00114024 Enable 720p via HDMI
  * ARM.imx51 Freescale:ENGR00113369 Support system boot without debug
    board on MX25
  * ARM.imx51 Freescale:ENGR00113940 FM can not work
  * ARM.imx51 Freescale:ENGR00114189 Enlarge the rootfs partition to
    accommodate Gnome-mobile
  * ARM.imx51 Freescale:ENGR00114166 MX51 Babbage: can not reboot from SPI
    NOR
  * ARM.imx51 Freescale:ENGR00114206 MX35: Fix GPIO pin definitions
  * ARM.imx51 Freescale:ENGR00114140 SSI: TX fail if RX is enabled before
    TX
  * ARM.imx51 Freescale:ENGR00114037 MX31: LCD can not resume after
    entering standby
  * ARM.imx51 Freescale:ENGR00113990 Fix for mtd_oobtest test failure
  * ARM.imx51 Freescale:ENGR00110228 Fix GPT timer stop issue
  * ARM.imx51 Freescale:ENGR00114282 MX51: Disable L2 SRPG
  * ARM.imx51 Freescale:ENGR00114273-1 MX233 IIM: Add virtual IIM device
  * ARM.imx51 Freescale:ENGR00114273-2 IIM: Add virtual IIM driver for MXS
    platform
  * ARM.imx51 Ubuntu: Updated configuration, unset MXC_HMP4E

 -- Stefan Bader <stefan.bader@canonical.com>  Mon, 24 Aug 2009 10:55:16 +0200

linux-fsl-imx51 (2.6.28-0.0) jaunty; urgency=low

  [ Stefan Bader ]

  * Create first release based on 2.6.28-15.50

 -- Stefan Bader <stefan.bader@canonical.com>  Mon, 24 Aug 2009 10:45:19 +0200

